Trojan Elite Solo SE 1700 x 700 mm Whirlpool Bath

A stunning 1700 x 700 mm single ended Solo Elite bath comes complete with a stunning body hydrotherapy system comprising of either 8,12 or 24 jets. Made in the UK from 100% sanitary grade white acylic for a stunning finish.

The bath comes fully assembled and is fully self contained - plumbing in one of our baths is exactly the same as any other bath, with the exception of the electricity supply for the pumps.  

As one of the largest manufacturers of acrylic baths in the UK, Trojan take unprecedented pride in each one of their baths. All the way from design, production and finally to the launch of a new bath, Trojan ensure that each quality check reaches only the highest of expectations.

The Solo 1700 mm is part of the Elite range of baths from Trojan Baths. This compact yet stylish bath will compliment any bathroom, with it's straight, sharp lines and classic profile. The single ended shape has the waste and overflow pre drilled at one end of the bath, but the bath comes with no tap holes, allowing you to fit whichever tap system you choose. 

8 Jet Bath & System Specification 

• 8 Large side jets with directional eyeballs
• Air flow (turbulence) controller with integrated On / Off Switch
• Safety suction, with chrome cover
• 0.85 HP Pump

12 Jet Bath & System Specification 

• 6 Large side jets with directional eyeballs
• 4 small, low profile back jets with mini directional eyeballs
• 2 small, low profile foot jets with mini directional eyeballs
• Air flow (turbulence) controller with integrated On / Off Switch
• Divertor to select back jets only, main jets only or both together
• Safety suction, with chrome cover
• 1.10 HP Pump

24 Jet Bath & System Specification 

• 6 Large side jets with directional eyeballs
• 4 small, low profile back jets with mini directional eyeballs
• 2 small, low profile foot jets with mini directional eyeballs
• Air flow (turbulence) controller with integrated On / Off Switch for whirlpool
• Divertor to select back jets only, main jets only or both together
• Safety suction, with chrome cover
• Dry-run safe pump (pump will not fail if accidentally operated without water)
• 12 chrome plated, low profile brass air spa jets
• Pneumatic Chrome On / Off button for air spa
• Single speed 400-500W Air Blower
• 1.10 HP Pump

Upgrade the bath shell to TrojanCast

What is TrojanCast? TrojanCast is a substantial coating fitted to the entire underside of your acrylic bath, which provides a cast iron effect with all the benefits of modern warm acrylic. This reinforcement process is designed to increase strength and rigidity which makes your acrylic bath more hard wearing.

Key Features

Intensive reinforced finish.

Strong hard wearing bath with great insulation keeping the water hotter for longer.

To upgrade to TrojanCast select from the options box above.