SBC Trojan LUX Orlando 1500 x 1020mm LH Corner 24 Jet System with Chromotherapy

A spacious offset left-handed 1500 x 1020 mm Trojan Orlando whirlpool bath fitted with our Lux whirlpool spa system including chromotherapy lighting with chrome on brass slimline jets and controls. For customers wanting luxury bathing but with limited space, this left-handed Orlando bath fits perfectly into the corner of any bathroom and will allow you to experience incredible relaxation. 

The Orlando Whirlpool bath is also available in 8 and 24 jets in left or right hand.

As one of the largest manufacturers of acrylic baths in the UK, Trojan takes unprecedented pride in each one of its baths. All the way from design, production and finally to the launch of a new bath, Trojan ensures that each quality check reaches only the highest of expectations 

Bath Specification:-

White Acrylic Shell 1500 x 1020 mm
White Acrylic Bath Panel
Supplied Without Tap Holes - Your Installer Will Drill These
160 Litre Water Capacity Approx

Our LUX Whirlpool System Specification:-

• 6 large directional flush chrome on brass side whirlpool jets
• 4 small directional flush chrome on brass side whirlpool jets 
• 2 small directional flush chrome on brass side whirlpool jets 
• 12 flush chrome air spa jets fitted to the base of the bath
• Low profile whirlpool on/off control with integrated power adjustment
• Low profile diverter valve to select a combination of back and side jets or just side or back
• Chrome on brass flush safety suction
• Integrated pop-up waste system connected to the pump for total pipe drain down
• 1.10 HP pump / 0.8KW is powerful and quiet

Our Lux Range includes a chromotherapy light

• Just turn on, allow the water to massage you and bathe in a hue of colour that fades from relaxing blue to spiritual violet to energising red and on and on.
• Touchpad controller fitted to the bath
• Pause colours or cycle through all the colours

Upgrade Bath Shell to TrojanCast?

What is TrojanCast? TrojanCast is a substantial coating fitted to the entire underside of your acrylic bath, which provides a cast iron effect with all the benefits of modern warm acrylic. This reinforcement process is designed to increase strength and rigidity which makes your acrylic bath more hard-wearing.

Key Features

Intensive reinforced finish.

A strong hard wearing bath with great insulation keeps the water hotter for longer.

To upgrade to TrojanCast select from the options box above.

Optional Extras

If you would like to upgrade your bath please visit our Upgrades Page or select below.

Our whirlpool corner baths are also available in other shapes and sizes.